IUE-CWA LOCAL 808 - APPRENTICESHIP AGREEMENT

APPRENTICESHIP AGREEMENT

This AGREEMENT, entered into this day of , 20 between , hereinafter referred to as the EMPLOYER, and born hereinafter referred to as APPRENTICE, and (if a minor) hereinafter referred to as his or her PARENT or GUARDIAN.

Witnesseth that the EMPLOYER, the APPRENTICE, and the PARENT (or Guardian) desire to enter into an agreement of apprenticeship and, therefore, in consideration of the promises and of mutual covenants herein contained, do hereby mutually covenant and agree as follows:

That the EMPLOYER shall employ and teach the APPRENTICE the trade or craft of in conformity with the terms and conditions set forth in the apprenticeship program of the and made part hereof.

That the APPRENTICE shall perform diligently and faithfully the work of the trade or craft during the period of apprenticeship, in conformity with the terms and conditions set forth in the above-mentioned program and made a part hereof.

That the PARENT (or GUARDIAN) promises that the APPRENTICE will duly perform all obligations undertaken herein.

That the apprenticeship term begins on the day of , 20 and terminates upon the completion of the APPRENTICE of hours of employment for said EMPLOYER in said trade or craft.

That this agreement is subject to approval by the Bureau of Apprenticeship and Training.

That either party may terminate the agreement in accordance with the terms of the program by submitting written notification of termination to the approving agency but, if such notification is submitted after completion of the probationary period, the reasons for termination shall be given.

In WITNESS WHEREOF the parties hereunto set their hands and seals:

(SEAL)

(Apprentice)

(Address)

(SEAL)

(Parent or Guardian)

(SEAL)

(Employer)(Officer)

(Address)

Registered with the Bureau of Apprenticeship and Training by on , 20

KIT OF TOOLS TO BE FURNISHED EACH TOOL MAKER APPRENTICE

1 2" paint brush

1 Thread gauge

1 Ball peen hammer

1 Federal Non-Magnetic indicator and case (.0001)

1 2" inside calipers

1 2" outside calipers

1 6" inside calipers

1 6" outside calipers

1 6" dividers

1 8" adjustable wrench

1 0 to 1" micrometer calipers

1 1" to 2" micrometer calipers

1 8" pliers

1 10" Miller Falls hack saw frame

1 Set Alien wrenches

1 Bearing scraper

1 12" combination set

1 257-A Surface gauge

1 6" scale

1 Set (1/2" to 6") telescoping gauges

1 Machine chest

1 12" adjustable wrench

1 Small protractor

1 Center gauge

KIT OF TOOLS TO BE FURNISHED EACH ELECTRICIAN APPRENTI CE

1 6" screwdriver 1/4" bit

1 8" screwdriver 5/16" bit

1 Hacksaw frame

1 Electrician´s knife

1 Pr. long nose pliers

2 Prs. chandelox pliers

1 Medium hammer

1 Center punch

1 Sq. D. Voltage tester

1 6" folding rule

1 7" pr. side cutting pliers

1 7" diagonal cutting pliers

1 8" adjustable wrench

1 6" adjustable wrench

2 14" pipe wrenches

1 Tool pouch

1 Tool box

KIT OF TOOLS TO BE FURNISHED EACH CARPENTER APPRENTICE

1 6´ rule

1 Claw hammer

1 6" try square

1 36" wrecking bar

1 No. 8 saw

1 No. 12 saw

1 18" key hole saw

1 Hatchet

1 30" level

1 Self-chalking chalk line

1 Set wrenches 1/4" to 1" by 1/16"

1 1/4" wood chisel

1 1/2" wood chisel

1 3/4" wood chisel

1 1" wood chisel

1 Wood brace with 10" sweep

1 1/4" wood bit

1 1/2" wood bit

1 3/4" wood bit

1 7/8" wood bit

1 1" wood bit

1 1 1/8" wood bit

1 11/4" wood bit

1 Framing square, body size 24" x 2"

Tongue size 18" x 11/2" in 16ths, 8ths, 12ths, lOths, and 32nds.

1 50´ steel tape

1 Yankee screwdriver

1 Pr. goggles

1 Plumb bob

1 8" plane

1 8" adjustable wrench

1 10" adjustable wrench

1 Tool box

KIT OF TOOLS TO BE FURNISHED EACH MILLWRIGHT APPRENTICE

1 Pr. Goggles

1 11/2 lb. ball peen hammer

1 10" hacksaw frame

1 8" pipe wrench

1 14" pipe wrench

1 3/8" chisel

1 3/4" chisel

1 Center punch

1 3/16" punch

1 7/16" punch

1 6" adjustable wrench

1 10" adjustable wrench

1 Set Alien wrenches

1 8" pliers

1 6´ Lufkin rule

1 6" scale

1 12" combination set

1 6" inside calipers

1 6" outside calipers

1 6" divider

1 Small screw driver

1 Large screw driver

1 Plumb bob

1 Small metal tool box

KIT OF TOOLS TO BE FURNISHED EACH PLUMBER-PIPE FITTER APPRENTICE

1 Pr. goggles

1 11/2 lb. ball peen hammer

1 10" hacksaw frame

1 18" pipe wrench

1 24" pipe wrench

2 14" pipe wrenches

1 3/8" chisel

1 3/4" chisel

1 Center punch

1 3/16" punch

1 7/16" punch

1 6" adjustable wrench

1 10" adjustable wrench

1 Set Alien wrenches

1 8" pliers

1 6´ Lufkin rule

1 6" scale

1 12" combination set

1 6" inside calipers

1 6" outside calipers

1 6" divider

1 Small screwdriver

1 Large screwdriver

1 Plumb bob

1 Small metal tool box

KIT OF TOOLS TO BE FURNISHED EACH ENGINEERING MODEL MAKERS APPRENTICE

1 Pr. safety goggles

1 Pr. Metal Master snips M-l

1 Pr. Metal Master snips M-2

1 Pr. Metal Master snips M-3

1 No. 21/2 Miller composition mallet

1 Bumping hammer

1 Scriber (scratch awl)

1 Stanley awl

1 Center punch

1 Prick punch

1 6´ tape rule

1 3 meter tape rule

1 12" combination square w/protractor & 24" blade

1 Square Head

1 300 millimeter blade

1 600 millimeter blade

1 300 millimeter flexible scale

1 150 millimeter flexible scale

1 12" flexible scale

1 6" flexible scale

1 Pr. Standard Electrician´s pliers

1 Pr. Duck bill pliers

1 Pr. Needle nose pliers

1 Pr. Side cutter pliers

1 Pr. Pipe pliers

1 Pr. Vise grips

1 Machine Chest

1 4" divider

1 8" divider

1 1/2" cold chisel

1 3/4" cold chisel

1 Hacksaw

1 Set screwdrivers

1 6" adjustable wrench

1 10" adjustable wrench

1 0 to 1" Micrometer calipers

1 0 to 25 millimeter Micrometer calipers

1 Set wood chisels

1 Utility knife

1 Block plane

1 Heal dolly

1 12 oz. Ball peen hammer

KIT OF TOOLS TO BE FURNISHED EACH TOOL AND GAUGE INSPECTOR APPRENTIC E

1 2" paint brush

1 Thread gauge

1 Ball peen hammer

1 Federal Non-Magnetic indicator and case (.0001)

1 2" inside calipers

1 2" outside calipers

1 6" inside calipers

1 6" outside calipers

6" divider

8" adjustable wrench

0 to 1" micrometer calipers

1" to 2" micrometer calipers

8" pliers

1 Set Alien wrenches

1 12" combination set

1 257-A surface gauge

1 6" scale

1 Set (1/2" to 6") telescoping gauges

1 Center gauge

1 Machine chest

KIT OF TOOLS TO BE FURNISHED EACH CHARGING BOARD MAINTENANCE APPRENTI CE

1 6" Screwdriver 1/4" bit

1 8" Screwdriver 5/16" bit

1 10" Hacksaw frame

1 Electrician´s knife

1 Pr. Long nose pliers

2 Prs. channel lock pliers

1 Center punch

1 Sq. D. Voltage tester

1 7" Wire strippers

1 7" Diagonal cutting pliers

1 6" Adjustable wrench

1 8" Adjustable wrench

10" Adjustable wrench

Tool pouch

Tool box

Pr. Welding goggles

Pr. Safety glasses

8" Pipe wrench

14" Pipe wrench

18" Pipe wrench

3/8" Cold chisel

3/16" Punch

Set Alien wrenches

6" Scale

6´ Lufkin rule

Plumb Bob

Ball peen 1 1/8" face hammer

Tubing flare set with cutter

Torpedo level

Set Combination wrenches to 1´

IN WITNESS WHEREOF, the parties hereto have caused their names to subscribed by their duly authorized officers and representatives this 19th day of February, 2000.

THE INTERNATIONAL UNION OF ELECTRONIC, ELECTRICAL SALARIED, MACHINE AND FURNITURE WORKERS, A.F.L-C.I.O. AND ITS AFFILIATE LOCAL 808.

STEVE BELWOOD

President, Local 808

RICK PEASE

Vice President, Local 808

KENNY KNIGHT

Shop Chairman, Local

808

WAYNE PORTER

Skilled Trades Chairman,

Local 808

CLYDE GRACE